Villamosszigetelő és Műanyaggyár Kft.

Products...

  • 1
  • 2
  • 3
  • 4
Prev Next

Supporting insulators with a n…

Supporting, crossover and connecting insulator

Supporting insulators with a nominal working voltage over 1kV

Types: ETA 12, ETB 12, ETC 12, ETB 24-1, ETB 24-2, ETB 40, ETC 40 Standard:&nb...

Plastic sleeve for MÜV protect…

Isulated pipes

Plastic sleeve for MÜV protecting pipes

Type: MÜV k. Standard: MSZEN 50086-1:1997; MSZEN 61386-21:2008 App...

MüV type of rigid protecting p…

Isulated pipes

MüV type of rigid protecting pipes for electrical use

Types: MüV I. MüV II. Application: The MÜV type of protecting pipe is applica...

PP-R Wall and under-floor heat…

Hot water and heating pipes

PP-R Wall and under-floor heating pipe

Standard: MSZ EN ISO 15874 – 1: 2004, MSZ EN ISO 15874 – 2: 2004, DIN 4726 :2000 ...

MÜ III - Thin-walled flexible …

Isulated pipes

MÜ III - Thin-walled flexible plastic pipes

Type: MÜ III. Standard: VSZMTS 06.30/2001. (MSZEN 61386 except dimension...

Connecting insulator

Supporting, crossover and connecting insulator

Connecting insulator

Type: KT – 4 – 125 Standard: VSZM TS 05.3 / 99 Appli...

Pipe for cold and hot water ne…

Hot water and heating pipes

Pipe for cold and hot water network, central-heating and under-floor heating systems

Standard: EN ISO 15875 – 1: 2003, EN ISO 15875 – 2: 2003, DIN 4726 :2000, DIN ...

HDPE Protective pipe for cable…

Profiles and other products

HDPE Protective pipe for cables

Standard: MSZ EN 50086 – 1, MSZ EN 50086 – 2 – 4, IEC 614, MATÁV – PKI – FI MMD 23...

PE-RT Wall and under-floor heating pipe

Standard: DIN 16833 : 2001, DIN 16834 : 2001, DIN 4726 : 2000

Number of the technical permission in building industry: A – 138 / 1997

Application field: Pipes are applicable for heating systems, like wall and under-floor heating, climate and heating systems with radiators of low temperature with the following network profiles (working temperature / pressure.)

Wall and under-floor heating system, climate and radiator heating of low temperature: 70oC / 4 bar

- Pipe’s dimensions should be selected as a function of working temperature and pressure (4–10 bar).
- The three-layer pipeline have a protective layer preventing oxygen diffusion.
- The single-layer pipeline is applicable with the following conditions:

  These pipe has not any preventing layer against oxygen diffusion, therefore in the heating network should be prevented those parts, which are capable for corrosion (separation with heat-changer, additive – inhibitor – in the heating system, application of non-corrode materials, etc.).

Material: Polyethylene with increased heat-proof quality ( PE – RT )

Execution:

- single-layer type 
- multi-layer - NOOXYPIPE® - 3 type

Colour:

- self-colour 
-  or according to customers’ requirements

Execution: in 300 metres long rolls

Nominal dimensions:

In both types: Ø 12x1,3; 14x2; 15x1,7; 16x2; 17x2; 20x2; 22x2
Additional dimensions in Single-layer type: Ø 6x1; 14x4,5; 25x3

Structural properties of the polyethylene pipes with increased heat-proof quality:

Basic pipe:

At both execution/types the inner pipe is called, which is in direct connection with the heating-agent and meets the necessary requirements (lifetime, temperature, pressure, etc.)
Material: Polyethylene with increased heat-proof quality – marking – PE – RT

Outer layer:

It can be found only at NOOXYPIPE ®- 3 – a plastic preventing layer, which can reduce and stop through the wall of pipe the oxygen diffusion in the pipe.
Material: Ethylene – vinyl-alcohol ( EVOH ) copolymer

Middle layer:

It can be found only at NOOXYPIPE ®- 3 – Binding or adhesive layer, which help by sticking of inner layer (basic pipe) and outer layer

Material: special plastic polymer

The layers of the three-layer NOOXYPIPE® - 3 PE – RT are developed during the production, and through its lifetime they cannot be broken off each other.

Quality properties:

Raw material: Ethylene-octen copolymer with increased heat-proof quality and medium density, which meets the requirements of prescription VSZM – AS 19 / 00

Finished product:

Dimension:

Dimensions and tolerances meets the requirements of Standard’s prescription DIN 16834 : 2001.

By multi-layer pipe the wall thickness is related only to the basic pipe!

Thickness of preventing layer: 0,08 mm

Thickness of adhesive layer: 0,04 mm

Thickness of preventing and adhesive layer together: max. 0,12 mm

Strength caracteristics: A non-dimensional number, which describe the strength of the pipe.

Marking: S
Calculation formula: S =( d- en ) /  2e(dn= outer diameter, e= wall thickness

Lifetime: minimum 50 years, according to application experiences and calculations, supposing a pipe with recommended rigidity applied in heating systems, described in the Standard.

Surface:

Smooth outer and inner surface. On the outer surface any scratches, which can be damaging the preventing layer are not permitted. On the inner surface some linear slight scratches, which developed during the production and does not influence the rigidity and lifetime of the pipe can be permitted.
Bending radius: min. 5 d
Degree of Oxygen diffusion : less, than 0,1 g/m3/day
Linear coefficient of thermal expansion: according to Standard DIN 52612: 1,95 exp – 4 / k

Weather-proof quality:

The pipe’s material can be damaged by UV radiation. Through a longer storage the pipe should be prevented from the damaging effects of weather (storage in roofed site)

Marking:

Application and identification details are indicated by the producer on the outer surface of the pipe in every metre, which is well readable without any expedient.

Colour:

Self-coloured or according to customer’s requirements.

Application guide:

-  The heating system should be planned by a responsible designer and according to the plans should be completed and put in working by the guidance and control of a qualified technician. The maintenance should be identified by the designer.
- The outer layer of NOOXYPIPE â - 3 PE - RT will basically stop oxygen diffusion, but the system’s parts should be carefully selected according to corrosion.
-  Before the installation the pipes should be surveyed. Only damage free pipes can be installed.
-  The NOOXYPIPE â - 3 PE - RT is applied for all kind of heating systems according to Standard of MSZ EN 1264.
-  Pipes can be equally bounded by disengaged – clamping, otherwise by express junction, not releasable moulded metal bind. (The supplementary control of binding should be assured.)
-  The straight parts of the system and the binding of the pipes should be formed according the thermal expansion rules.
-  The working parameters of the heating systems cannot exceed the 70oC, 4 bar. For a short period of time the pipe wears out the temperature of 100° C. In these circumstances the expecting lifetime of the pipe is 50 years according to DIN 16834.
Last modified onSaturday, 24 June 2017 11:48