Villamosszigetelő és Műanyaggyár Kft.

Products...

  • 1
  • 2
  • 3
  • 4
Prev Next

MCS Plastic cable channel

Channels

MCS Plastic cable channel

Type: MCS Standard: MSZ EN 50085-1:1998, MSZ EN 50085-2-1:1998, CEI IEC 1084-1...

Connecting insulator

Supporting, crossover and connecting insulator

Connecting insulator

Type: KT – 4 – 125 Standard: VSZM TS 05.3 / 99 Appli...

MüV type of rigid protecting p…

Isulated pipes

MüV type of rigid protecting pipes for electrical use

Types: MüV I. MüV II. Application: The MÜV type of protecting pipe is applica...

Crossover insulators 12, 24 kV

Supporting, crossover and connecting insulator

Crossover insulators 12, 24 kV

Types: ASM 12/8, ASM 12/16, ASM 12/30, ASM 24 Standard: VSZM VSZ 50-86...

Plastic Profiles

Profiles and other products

Plastic Profiles

Application field: Extruded plastic profiles are developed for the building- and f...

MÜ III - Thin-walled flexible …

Isulated pipes

MÜ III - Thin-walled flexible plastic pipes

Type: MÜ III. Standard: VSZMTS 06.30/2001. (MSZEN 61386 except dimension...

Supporting insulators with a n…

Supporting, crossover and connecting insulator

Supporting insulators with a nominal working voltage over 1kV

Types: ETA 12, ETB 12, ETC 12, ETB 24-1, ETB 24-2, ETB 40, ETC 40 Standard:&nb...

Plastic sleeve for MÜ I. prote…

Isulated pipes

Plastic sleeve for MÜ I. protecting pipes

Type: MÜ I Sleeve Standard: VSZM TS 06.33/2001 Application field: For join...

KPE Pressure pipeline for portable water supply

Type:: KPE P6, P10
Standard: MSZ 7908/1
Application field: Pipes are applicable for potable water supply as pressure pipes. They can be laid in ground ditches and can be fitted together with other pipes – if they are available a statement of application from Hungarian Water Conservancy – with quick binding fittings. Pipes can be welded with other pipes or fitting parts, if the manufacturer can certify the compatibility of the pipes and fitting parts. Advantageous properties makes possible a good use of this pipeline in public utilities as follows: corrosions-proof, little weight, simple laying and handling, scales hardly develop in this pipeline as opposed to traditional steel or iron pipelines. As pipes are made with longer length or in rolls, it is no necessary the frequent lengthening, so occurrence of defects is reduced. In addition the smooth inner surface of the pipes is advantageous to the conditions of water-flow.
Application conditions:
  • Operation temperature: 20 °C
  • Max. application temperature: 30 C
  • Pressure ranges:: 
    Size: 25x2, 32x2 Pressure: 6 bar 
    Size : 25x2,3, 32x3, 63x5,8 Pressure: 10 bar
Pipes are not applicable in such files where there are presumable that soil is contaminated by oil or dissolves ( For instance petrol station, assembly workshops, chemical factories etc.).
Raw material:
  • material: polyethylene, UV stabilized by carbon black .
  • Type: PS 380-30/302
  • Colour: black
  • Execution: 200 metres long rolls, or according to the customer’s requirements. Minimum inner diameter of the rolls in case of diameter of 25 mm: 700 mm, In case of diameter of 32 mm: 800mm
  • Marking of the pipes: VSZM KPE P6 or P10; nominal outer diameter, nominal wall thickness, quality grade (B), date of production, MSZ 7908/1, number of metres, repeated in every metre.
Technical properties:
  • Density: 0,95 g/cm3
  • Tensile strength at yield: 20 MPa
  • Tensile strength at break: 33 MPa
  • Elongation at break: 600 %
  • Modulus for Elasticity: 690 Mpa
  • Vicat softening point: 120 °C
  • Hardness of Shore D: 61
Material is suitable for purpose of potable water supply in accordance with the permission of the Hungarian Institute for Public Health named “Johan Béla” with No. 257.
Product:
  • Nominal operating pressure: the admissible maximum operating pressure at 20 °C is equal to the pressure stage of the pipe in terms of bar: P = 6 bar and P = 10 bar
  • Grade of Quality: "B"
  • Modification in dimension after reheating treatment for 60 minutes at 110 °C:
    Lengthwise: max. 5% 
    Transverse: max. 2,5 %
Resistance to constant inner overpressure satisfy according to the Standard No. MSZ EN 921 .
Number of the application permission: KHVM-460
Last modified onSaturday, 24 June 2017 11:44