Villamosszigetelő és Műanyaggyár Kft.

Products...

  • 1
  • 2
  • 3
  • 4
Prev Next

Guide post to show the edge of…

Profiles and other products

Guide post to show the edge of public road

Standard: MSZ -07-3609:1981  Area of use: to show the track and edge...

Plastic bent pipe for MÜV pipe…

Isulated pipes

Plastic bent pipe for MÜV pipes

Type: MÜV kö. Standard: MSZEN 50086-1:1997; MSZEN 61386-21:2008 Ap...

PE-RT Wall and under-floor hea…

Hot water and heating pipes

PE-RT Wall and under-floor heating pipe

Standard: DIN 16833 : 2001, DIN 16834 : 2001, DIN 4726 : 2000 Number of ...

Isonal 2000® plastic cable tru…

Channels

Isonal 2000® plastic cable trunking system

Introduction and application: Building electrical, telecommunication and recently i...

Plastic sleeve for MÜV protect…

Isulated pipes

Plastic sleeve for MÜV protecting pipes

Type: MÜV k. Standard: MSZEN 50086-1:1997; MSZEN 61386-21:2008 App...

Plastic Profiles

Profiles and other products

Plastic Profiles

Application field: Extruded plastic profiles are developed for the building- and f...

Crossover insulators 12, 24 kV

Supporting, crossover and connecting insulator

Crossover insulators 12, 24 kV

Types: ASM 12/8, ASM 12/16, ASM 12/30, ASM 24 Standard: VSZM VSZ 50-86...

MÜ III - Thin-walled flexible …

Isulated pipes

MÜ III - Thin-walled flexible plastic pipes

Type: MÜ III. Standard: VSZMTS 06.30/2001. (MSZEN 61386 except dimension...

Plastic sleeve for MÜV protecting pipes

Type: MÜV k.

StandardMSZEN 50086-1:1997; MSZEN 61386-21:2008

Application field: For joining MÜV I. rigid thick-walled protecting pipes, in determined environments and conditions.

Material: Rigid PVC for electrical use

Colour: brown or grey

Sizes:

d = nominated inner diameter (mm)
v = nominated wall-thickness (mm)
h = nominated length (mm)

Description and nominated sizes of plastic sleeves:

Description

d (mm)

v min (mm)

h (mm)

       

MÜV k.

     

12

12,1 (+0,2; - 0)

1,1 ± 0,1

30 ± 2

16

16,1 (+0,2; -0)

1,3 ± 0,1

35 ± 2

20

20,1 (+0,2; -0)

1,4 ± 0,1

45 ± 2

25

25,1 (+0,3; -0)

1,6 ± 0,2

55 ± 2

32

32,1 (+0,3; -0)

1,7 ± 0,2

70 ± 3

40

40,1 (+0,3; -0)

1,8 ± 0,2

85 ± 3

50

50,1 (+0,3; -0)

2,3 ± 0,2

105 ± 3

Execution: according to requirements of customers.

Raw material:

Density

g/cm3

1,65

Density

MPa

40

Elongation at break

%

15

Specific volumetric resistance at 20 °C

Ohm x cm

1 x 1015

Breakdown voltage

kV/mm

20

Strength properties:

Impact resistance: After a reheating treatment at 60 ± 2 °C for 240 hours and then at -5 °C for 2 hours it will not break under effect of impact energy of 2 J.

Heat-resistance: 60 ±2 °C according to VSZM TS 02/1/1/98
Ignitability: tubes are hardly inflammable according to V0 and self extinguish

Electrical properties:

Electric strength: Sleeves comply with requirements in case of test at 2000 V during 15 min. after immersion in water during 24 hours
Insulation resistance: min. 100 MOhm

 

Last modified onSunday, 25 June 2017 11:16
More in this category: Plastic bent pipe for MÜV pipes »