Villamosszigetelő és Műanyaggyár Kft.

Products...

  • 1
  • 2
  • 3
  • 4
Prev Next

MCSE Plastic cable channel

Channels

MCSE Plastic cable channel

Type: MCSE 1, MCSE 2, MCSE 3 Standard: MSZ EN 50085-1:1998, MSZ EN 50085-2-1:...

Supporting insulators for nomi…

Supporting, crossover and connecting insulator

Supporting insulators for nominal working voltage below 1 kV

Types: ET - 500 ETB - 1 ETB - 1/b Standard: VSZM TS 05.7/2003, VSZM TS 05.8...

Connecting insulator

Supporting, crossover and connecting insulator

Connecting insulator

Type: KT – 4 – 125 Standard: VSZM TS 05.3 / 99 Appli...

Plastic bent pipe for MÜ I. pi…

Isulated pipes

Plastic bent pipe for MÜ I. pipes

Type: MÜ I. Standard: VSZM TS 06.32/2001 Application field: For joining MÜ...

Supporting insulators with a n…

Supporting, crossover and connecting insulator

Supporting insulators with a nominal working voltage over 1kV

Types: ETA 12, ETB 12, ETC 12, ETB 24-1, ETB 24-2, ETB 40, ETC 40 Standard:&nb...

PE-RT Wall and under-floor hea…

Hot water and heating pipes

PE-RT Wall and under-floor heating pipe

Standard: DIN 16833 : 2001, DIN 16834 : 2001, DIN 4726 : 2000 Number of ...

Plastic sleeve for MÜ I. prote…

Isulated pipes

Plastic sleeve for MÜ I. protecting pipes

Type: MÜ I Sleeve Standard: VSZM TS 06.33/2001 Application field: For join...

PP-R Wall and under-floor heat…

Hot water and heating pipes

PP-R Wall and under-floor heating pipe

Standard: MSZ EN ISO 15874 – 1: 2004, MSZ EN ISO 15874 – 2: 2004, DIN 4726 :2000 ...

Plastic bent pipe for MÜV pipes

Type: MÜV kö.

StandardMSZEN 50086-1:1997; MSZEN 61386-21:2008

Application field: For joining MÜV I. rigid thick-walled protecting pipes, in determined environments and conditions.

Material: Rigid PVC for electrical use

Colour: brown or grey

Sizes:

Description and nominated sizes of plastic bent pipes:

Description

D (mm)

v min

R (mm)

a (mm)

         

MÜV kö.

       

12

12 (+ 0; - 0,3)

1,0

85

60 ± 3

16

16 (+ 0; - 0,3)

1,25

85

60 ± 3

20

20 (+ 0; - 0,3)

1,30

85

60 ± 3

25

25 (+ 0; - 0,4)

1,50

85

60 ± 3

32

32 (+ 0; - 0,4)

1,70

140

90 ± 5

40

40 (+ 0; - 0,4)

1,80

140

90 ± 5

50

50 (+ 0; - 0,4)

2,00

140

90 ± 5

Execution: according to requirements of customers.

Raw material:

Density

g/cm3

1,65

Tensile strength

MPa

40

Elongation at break

%

15

Specific volumetric resistance at 20 °C

Ohm x cm

1 x 1015

Breakdown voltage

kV/mm

20

Strength properties:

Impact resistance: After a reheating treatment at 60 ± 2 °C for 240 hours and then at -5 °C for 2 hours it will not break under effect of impact energy of 2 J.

Heat-resistance: 60 ±2 °C according to VSZM TS 02.1/1/98

Ignitability: tubes are hardly inflammable according to V0 and self extinguish

Electrical properties:

Electric strength: Tubes comply with requirements in case of test at 2000 V during 15 min. after immersion in water during 24 hours.

Insulation resistances: min. 100 MOhm

 

 
Last modified onSunday, 25 June 2017 11:14