Villamosszigetelő és Műanyaggyár Kft.

Products...

  • 1
  • 2
  • 3
  • 4
Prev Next

KPE Pressure pipeline for port…

Hot water and heating pipes

KPE Pressure pipeline for portable water supply

Type:: KPE P6, P10 Standard: MSZ 7908/1 Application field: Pipes are applica...

Plastic sleeve for MÜV protect…

Isulated pipes

Plastic sleeve for MÜV protecting pipes

Type: MÜV k. Standard: MSZEN 50086-1:1997; MSZEN 61386-21:2008 App...

Connecting insulator

Supporting, crossover and connecting insulator

Connecting insulator

Type: KT – 4 – 125 Standard: VSZM TS 05.3 / 99 Appli...

Plastic sleeve for MÜ I. prote…

Isulated pipes

Plastic sleeve for MÜ I. protecting pipes

Type: MÜ I Sleeve Standard: VSZM TS 06.33/2001 Application field: For join...

MCS Plastic cable channel

Channels

MCS Plastic cable channel

Type: MCS Standard: MSZ EN 50085-1:1998, MSZ EN 50085-2-1:1998, CEI IEC 1084-1...

HDPE Protective pipe for cable…

Profiles and other products

HDPE Protective pipe for cables

Standard: MSZ EN 50086 – 1, MSZ EN 50086 – 2 – 4, IEC 614, MATÁV – PKI – FI MMD 23...

Plastic bent pipe for MÜ I. pi…

Isulated pipes

Plastic bent pipe for MÜ I. pipes

Type: MÜ I. Standard: VSZM TS 06.32/2001 Application field: For joining MÜ...

Crossover insulators 12, 24 kV

Supporting, crossover and connecting insulator

Crossover insulators 12, 24 kV

Types: ASM 12/8, ASM 12/16, ASM 12/30, ASM 24 Standard: VSZM VSZ 50-86...

Plastic sleeve for MÜ I. protecting pipes

Type: MÜ I Sleeve

Standard: VSZM TS 06.33/2001

Application field: For joining MÜ I. rigid thick-walled protecting pipes, in determined environments and conditions.

Material: Rigid PVC for electrical use

Colour: brown or grey

Sizes:

d = nominated inner diameter (mm)
v = nominated wall-thickness (mm)
h = nominated length (mm)

Description and nominated sizes of plastic sleeves:

Description

d (mm)

v min (mm)

h (mm)

       

MÜ I.k.

     

11

18,7 (+0,00; -0,20)

1

60 +/-2

13,5

20,7 (+0,15; -0,25)

1

60 +/-2

16

22,8 (+0,15; -0,25)

1

60 +/-2

21

28,6 (+0,15; -0,25)

1,1

60 +/-2

29

37,4 (+0,20; -0,30)

1,2

80 +/-3

36

47,4 (+0,20; -0,30)

1,2

80 +/-3

48

54,5 (+0,00; -0,30)

1,3

80 +/-3

Execution: according to requirements of customers.

Raw material:

Density

g/cm3

1,65

Density

MPa

40

Elongation at break

%

15

Specific volumetric resistance at 20 °C

Ohm x cm

1 x 1015

Breakdown voltage

kV/mm

20

Strength properties:

Impact resistance: After a reheating treatment at 60 ± 2 °C for 240 hours and then at -5 °C for 2 hours it will not break under effect of impact energy of 2 J.

Heat-resistance: 60 ±2 °C according to VSZM TS 06.30/2001
Ignitability: tubes are hardly inflammable according to V0 and self extinguish

Electrical properties:

Electric strength: Sleeves comply with requirements in case of test at 2000 V during 15 min. after immersion in water during 24 hours
Insulation resistance: min. 100 MOhm

Last modified onSunday, 25 June 2017 11:11