Villamosszigetelő és Műanyaggyár Kft.

Products...

  • 1
  • 2
  • 3
  • 4
Prev Next

Plastic bent pipe for MÜ I. pi…

Isulated pipes

Plastic bent pipe for MÜ I. pipes

Type: MÜ I. Standard: VSZM TS 06.32/2001 Application field: For joining MÜ...

Plastic sleeve for MÜV protect…

Isulated pipes

Plastic sleeve for MÜV protecting pipes

Type: MÜV k. Standard: MSZEN 50086-1:1997; MSZEN 61386-21:2008 App...

Plastic sleeve for MÜ I. prote…

Isulated pipes

Plastic sleeve for MÜ I. protecting pipes

Type: MÜ I Sleeve Standard: VSZM TS 06.33/2001 Application field: For join...

Supporting insulators for nomi…

Supporting, crossover and connecting insulator

Supporting insulators for nominal working voltage below 1 kV

Types: ET - 500 ETB - 1 ETB - 1/b Standard: VSZM TS 05.7/2003, VSZM TS 05.8...

MÜ I - Thick walled rigid plas…

Isulated pipes

MÜ I - Thick walled rigid plastic pipes

Type: MÜ I., Standard: VSZM TS 06.30/2001. (MSZ EN 61386 except dimensio...

MCSE Plastic cable channel

Channels

MCSE Plastic cable channel

Type: MCSE 1, MCSE 2, MCSE 3 Standard: MSZ EN 50085-1:1998, MSZ EN 50085-2-1:...

Plastic Profiles

Profiles and other products

Plastic Profiles

Application field: Extruded plastic profiles are developed for the building- and f...

Plastic bent pipe for MÜV pipe…

Isulated pipes

Plastic bent pipe for MÜV pipes

Type: MÜV kö. Standard: MSZEN 50086-1:1997; MSZEN 61386-21:2008 Ap...

MÜ III - Thin-walled flexible plastic pipes

Type: MÜ III.

StandardVSZMTS 06.30/2001. (MSZEN 61386 except dimensions)

Field of application: Applicable for protection of insulated electrical cables. Installation may be made with building into the wall chase or above the false ceiling or can be laid. Tubes are applicable in rooms having “C” and “D” classification for inflammable risk (between temperature range of (-5) °C and (+60) °C without any strong mechanic effects. The type of protection will be specified by the properties of pipe network and its accessories and the development of connections.

Material: Rigid PVC for electrical use

Colour: grey

Dimensions:

D = nominal diameter (mm)

v = nominal wall thickness (mm)

Description and nominal sizes of the protective pipe:

Description

D (mm)

d min. (mm)

     

MÜ III.

11

12,1

11

 

13,5

14,6

13,5

 

16

17,2

16

 

23

24,4

23

 

29

30,8

29

 

36

38,2

36

 

48

50,6

48

Execution: in bundles with length of 2,5 metres or according to requirements of customers.

Raw Material:

Density

g/cm3

1,6

Tensile strength

MPa

40

Elongation at break

%

15

Specific volumetric resistance at 20 °C

Ohm x cm

1 x 1015

Breakdown voltage

kV/mm

20

Execution of Product: Smooth surface outside and inside with round cross-section

Strength properties:

Flexibility: Before bending practical to preheat the bending length along the contour by rubbing or any other way to 40-45 °C. By smaller diameters (MÜ III. 11-16.) practical to use the bending insert and bed produced by VSZM. By bigger diameters (above MÜ III 23.) necessary to use the bending insert after preheating on.

Compressing strength: on the result of 125 N compression lasting dents (less than 10%), the decrease of the outside diameter is less than 25%, there is no crack on the surface.

Impact resistance: After treatment at 60 ± 2 °C for 240 hours and then at -5 °C during 2 hours at least 9 from 12 test tubes will not be broken under effect of 0,6 J.

Heat-resistance: 60 ± 2 °C

Ignitability: tubes are hardly inflammable according to V0 and self extinguish

Electrical properties:

Electric strength: Tubes comply with requirements in case of test at 2000 V during 15 min. after immersion in water during 24 hours.

Aids for bending and joining

Bending insert for the tube: Applicable for nominated diameter of 11, 13,5 and 16 mm for cold bending

Material: flexible PVC

Colour: optional

Bending bed for tubes: Applicable for nominated diameter of 11, 13,5 and 16 mm for cold bending

Material: flexible PVC

Colour: optional

Expanding mandrel: Applicable for expanded cold joining for tubes with nominated diameter of 11, 13,5 and 16 mm.

Material: rigid PVC

Colour: optional

 

Last modified onSunday, 25 June 2017 11:09