Villamosszigetelő és Műanyaggyár Kft.

Products...

  • 1
  • 2
  • 3
  • 4
Prev Next

Plastic sleeve for MÜV protect…

Isulated pipes

Plastic sleeve for MÜV protecting pipes

Type: MÜV k. Standard: MSZEN 50086-1:1997; MSZEN 61386-21:2008 App...

Supporting insulators for nomi…

Supporting, crossover and connecting insulator

Supporting insulators for nominal working voltage below 1 kV

Types: ET - 500 ETB - 1 ETB - 1/b Standard: VSZM TS 05.7/2003, VSZM TS 05.8...

Plastic bent pipe for MÜ I. pi…

Isulated pipes

Plastic bent pipe for MÜ I. pipes

Type: MÜ I. Standard: VSZM TS 06.32/2001 Application field: For joining MÜ...

MüV type of rigid protecting p…

Isulated pipes

MüV type of rigid protecting pipes for electrical use

Types: MüV I. MüV II. Application: The MÜV type of protecting pipe is applica...

Connecting insulator

Supporting, crossover and connecting insulator

Connecting insulator

Type: KT – 4 – 125 Standard: VSZM TS 05.3 / 99 Appli...

MÜ I - Thick walled rigid plas…

Isulated pipes

MÜ I - Thick walled rigid plastic pipes

Type: MÜ I., Standard: VSZM TS 06.30/2001. (MSZ EN 61386 except dimensio...

MCSE Plastic cable channel

Channels

MCSE Plastic cable channel

Type: MCSE 1, MCSE 2, MCSE 3 Standard: MSZ EN 50085-1:1998, MSZ EN 50085-2-1:...

Pipe for cold and hot water ne…

Hot water and heating pipes

Pipe for cold and hot water network, central-heating and under-floor heating systems

Standard: EN ISO 15875 – 1: 2003, EN ISO 15875 – 2: 2003, DIN 4726 :2000, DIN ...

Profiles and other products

Profiles and other products (3)

HDPE Protective pipe for cables

Standard: MSZ EN 50086 – 1, MSZ EN 50086 – 2 – 4, IEC 614, MATÁV – PKI – FI MMD 23 – V 23, DIN 8075 Amendment 1

Application field: Conduction and protection of insulated cables and wires in communication networks. The wall of pipes is homogeneous in total length, give protection against easy or normal mechanical bearing force depending on types, so pipe can be laid into a substructure PVC pipe or directly into the ground. Pipe can be bended and formed by hand to a small degree. Pipe can be transported, stored or laid in climate conditions of Hungarian workplaces (-5°C - +60°C). The lifetime of protective pipe could be 30 years respecting the environmental damages and professional settlement.

Material: high density polyethylene (HDPE)

Colour: black

Sign and nominal dimensions of Protective pipe

Designation

(Type)

D min.

(mm)

d min.

(mm)

v

(mm)

32/2

N250

(easy bearing force)

32

24

2

40/3

N450

(normal bearing force)

40

30

3

50/3.6

N450

(normal bearing force)

50

37

3.6

50x4.6

N750

(normal bearing force)

50

37

4.6

(Except the above mentioned we take upon satisfying individual customers’ requirements)

Pipes for easy bearing force can be laid into substructure PVC pipes, pipes for normal bearing force directly to ground.

Execution: in 250 metres rolls, or after request in 6 m long pieces.

Quality characters:

Material:

Density: 0,94 g/cm3

Flowing index: 0,5 – 3,0 g/ 10 Min. (190°C/ 5 kg)

Elasticity modulus: ~ 600 N/mm2

Coefficient of thermal expansion: 2x10-4 K-1

Carbon content: 2,5 ± 0.5 %

The material does not content any additive hindering burning.

Finished product:

Crushing strength :

A least 5 % diameter’s reduction pressure exerted:

Type of 250: - 32x2 250 N

Type of 450: - 40x3 and 50x3,6 450 N

Type of 750: - 50x4,6 750 N

Shatter proof:

The protective pipe meets the requirements of Standard:

-          For easy bearing force: 3 J

-          For normal bearing force: 15 J

Pressure proof:

-          For types of 32x2, 40x3 and 50x3,6: PN 6 bar

-          For type of 50x4,6: PN 10 bar

Flexibility:

-          The smallest bending radius (R)

-          Above 20°C 1000 mm

-          On 0°C 2500 mm

-          On 5°C 5000 mm

Electrical strength:

The tested outgoing current is smaller than 100 mA / 2000 V / 15 Min.

Isolation resistance: bigger thank 100MOhm

Thermal characters:

Medium relative change in length is less than 3 %

Resistance to flame expansion: not resistance

Protection against outer damages:

The chemical quality of the pipe meets the requirements of Standard DIN 8075 with No.1. supplement.

Electromagnetic compatibility:

In proper use a passive component.

Suggestion for cable laying:

-          By transporting and storing pipe should be protected from any damages, soiling.

-          Elements of pipe lengthening and binding should assure the same protection at binding places like in the pipes.

-          Pipes for easy bearing forces are suggested to lay into PVC substructure pipe or repair pit. Laying directly into ground is not permitted. Compactness of pipes should be controlled by compression test before cable-threading.

-          Pipes for normal bearing for cab be laid into the homogeneous pipe valley of sand or sifted earth in 0,3 m thick. Compactness of pipes should be controlled by compression test before cable-threading.

Read more...

Plastic Profiles

Application field: Extruded plastic profiles are developed for the building- and furniture industry as structural and decorative elements replacing previous wood and metal accessories. 
They have several advantage against traditional materials, where those are applicable:
-weightless 
-directly applicable without any treatment
-make easy the construction
-flexible, can be nailed and screwed
-resistance to aging and weather, does not need colouring and maintenance
-can be produced in optional colour
-in connection with bigger production the price is low 
-application or construction does not need any expertness or qualification

Profiles for the furniture industry:

 

Descriptions Purchase No

(label No.)

Raw material
34 mm lock stank cover 3902 rigid PVC
39 mm lock stank cover 3903 rigid PVC
Rabbet-ledge covering from dust 3625 rigid PVC
Glass sliding underneath (depthless) 3626 rigid PVC
Glass sliding overhead (deep) 3627 rigid PVC
Edge lath for backside 3631 rigid PVC

 

Profiles for other applications:

 

Descriptions Purchase No

(label No.)

Raw material
Paper binder 4843 rigid PVC
d=5 mm PVC flex 5289 rigid PVC
Paper binder 6107 rigid PVC

 

Colour: according to customers’ requirements.

Execution: length after demand, but bundled maximum 25 kg.

Read more...

Guide post to show the edge of public road

Standard: MSZ -07-3609:1981

 Area of use: to show the track and edge of concrete surface of public road
 
Material: rugged PVC
 
Color: white – with added black stripe
 

Dimensions: 1600mm x 120mm x 90mm

 

 

 

Design:
 

On the roadside of concrete surface of public road

  • Can be inserted directly into the ground
  • Plastic tube with triangle cross-section, open at the bottom and closed at the bottom with a closing cap, equipped with accessories and black stripe, with rounded top
 
Packing: Per piece or per 5 pieces
 
Material: rugged PVC which withstands atmospheric and winter maintenance strain, it keeps its figure, in case of fracture it does not harm the vehicle or the passengers dangerously
 
Mechanical loadability: deformation is according to specification MSZ-07-3603:1981 F31.
 
Ability to withstand stroke by mounting and in use: the tube does not get fractured during the thickening of the soil or at the installation to the previously dug pit. In use if fractured it does not harm the vehicle or the passengers dangerously
Read more...